E13
Groupe SEB
Turbo Mode Overload / Power Limit Exceeded
Cordless vacuum displays E13 and the LED ring or display flashes red when starting turbo mode.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Excessive restriction in air path during turbo, Weak battery unable to supply turbo current, Failing turbo control MOSFET on PCB, Overloaded motor bearings
How to Fix / Troubleshooting
Safety: Remove the battery before cleaning or inspection.
- Reduce load: Ensure all filters are clean and the dust bin is empty. Test turbo mode with no accessories attached to minimize load.
- Check battery health: If turbo works only with a freshly charged battery and fails quickly, the battery may be weak and need replacement.
- Listen for motor noise: Unusual grinding or squealing in turbo mode suggests worn bearings, which increase load.
- Service: If E13 appears even with clean filters and a new battery, the turbo control circuitry or motor is likely faulty and should be replaced.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Main Suction Motor Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements