Groupe SEB Inadequate Cooling / Overheating

Vacuum body becomes very hot to the touch during normal use.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Blocked cooling vents, Clogged filters, Operating continuously on turbo, Internal dust buildup around motor

Safety: Stop using the vacuum and remove the battery. Allow it to cool completely.

Clean vents: Use a soft brush to remove dust from all external vents.
Service filters: Clean or replace filters to restore airflow.
Reduce duty cycle: Avoid running on maximum power for extended periods; alternate with lower settings.
If overheating persists: Internal dust or motor issues may require professional cleaning or motor replacement.

Medium 3/5

Pre-Motor Filter

Check Price on Amazon

We may earn a commission from links on this page.