Vacuum has very weak suction even though the motor sounds normal.

Safety first: Turn OFF the vacuum and remove it from the charger before disassembly.

• Empty the bin: Remove and empty the dust bin. Tap it gently to dislodge compacted debris.
• Clean cyclone assembly: Detach the cyclone unit from the bin (if separate). Use a soft brush to remove fine dust from the cyclone cones and mesh screens. Do not wash unless the manual explicitly allows it.
• Check wand and hose: Look through the wand and any flexible hose for blockages. Push out clogs with a blunt, non‑sharp rod.
• Service filters: Remove the pre‑motor filter and HEPA filter. Tap gently to remove dust; wash only if labeled washable and dry completely before reinstalling.
• Inspect seals: Ensure all gaskets and seals between the bin, cyclone, and motor housing are intact and seated properly to prevent air leaks.