Vacuum is difficult to push on carpets; nozzle seems to stick to the floor.

Safety first: Turn OFF the vacuum before adjusting the nozzle.

• Check nozzle wheels: Inspect front and rear wheels for hair or debris that prevents them from rolling freely. Clean thoroughly.
• Inspect floor seal: Look at the rubber strip along the front or rear of the nozzle. If it is curled under or deformed, it can cause drag; replace if damaged.
• Use lower power mode: On thick carpets, use a lower suction mode to reduce floor adhesion.
• Replace nozzle if worn: If wheels are worn flat or the housing is warped, replace the motorized nozzle assembly.