Jimmy Mechanical Noise / Bearing or Debris Issue

Vacuum makes loud rattling or grinding noise during operation

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Debris in motor fan, Worn motor bearings, Loose screw or part inside floorhead, Damaged brushroll bearings

How to Fix / Troubleshooting

Safety first: Remove the battery immediately if you hear grinding to prevent further damage.

  • Step 1 – Isolate source: Run the vacuum briefly without the floorhead (handheld only). If noise disappears, the issue is in the floorhead. If noise remains, suspect the motor.
  • Step 2 – Inspect floorhead: Open the floorhead, remove the brushroll, and check for stones or hard objects. Spin the brushroll ends; replace if rough or noisy.
  • Step 3 – Check motor area: Remove dust cup and cyclone. Inspect motor inlet for debris. Do not insert metal tools into the fan.
  • Step 4 – Motor replacement: If noise clearly comes from the motor and persists, replace the main motor assembly.
Advertisements

Repair Difficulty

Hard 4/5

Required Part

Brushroll with Bearings
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements