F5
Levoit
Dust Cup Presence Switch Fault
Vacuum displays F5 and cannot detect the dust cup; unit will not start
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Dust cup not fully seated, Broken dust cup latch, Faulty microswitch or magnetic reed switch, Misaligned magnet in dust cup
How to Fix / Troubleshooting
Safety first: Remove the battery before adjusting the dust cup.
- Remove and reinstall dust cup: Take off the dust cup and reinstall it carefully, ensuring the latch clicks firmly into place.
- Inspect latch and tabs: Check for broken plastic tabs or a worn latch that prevents full engagement. Replace the dust cup if damaged.
- Check switch area: Locate the small switch or magnet area on the main body where the dust cup seats. Clean any dust buildup that may prevent proper contact.
- Test by gently pressing: With the dust cup installed and battery removed, gently press near the switch area to feel if the latch engages. If it feels loose or does not click, the switch may be faulty.
- If F5 remains: The dust cup presence switch or magnet may need replacement, which requires opening the main body. Have this done by a professional.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Dust Cup Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements