Levoit LED Circuit Failure

LED headlight on floor head does not turn on, but brushroll and suction work

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Burned‑out LED strip, Broken wire inside floor head, Loose LED connector, Failed LED driver on floor head PCB

Safety first: Remove the battery before inspecting the floor head.

Check connector: If accessible, open the floor head shell and ensure the LED strip connector is firmly seated on the PCB.
Inspect for damage: Look for broken wires or burnt components near the LED area.
Functionality check: Since suction and brushroll work, the issue is isolated to the LED circuit.
Replace floor head or LED module: If the LED strip or PCB is damaged, replace the entire floor head or LED module as supplied by Levoit.

Medium 3/5

Floor Head LED Strip

Check Price on Amazon

We may earn a commission from links on this page.