Logik Intermittent LED Power Supply

LED lights on the floor head flicker during use but the brushroll continues to spin.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Loose LED connector in floor head, Broken wire in swivel neck, Failing LED strip, Poor contact between wand and floor head

How to Fix / Troubleshooting

Safety first: Remove the battery and detach the floor head.

  • Check wand‑head connection: Clean the electrical contacts and ensure the head clicks firmly into the wand.
  • Flex test: With the battery reinstalled briefly, run the vacuum and gently move the neck of the floor head. If flickering changes with movement, the internal cable is likely damaged.
  • Open floor head: If possible, open the head and inspect the LED wiring and connectors. Reseat any loose plugs.
  • Replace LED strip or head: If the strip or wiring is damaged, replace the LED module or the entire floor head assembly.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Motorized Floor Head Assembly
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements