Medion Insufficient Cooling / Motor Overheating

Vacuum body becomes unusually hot to touch near the motor area

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Blocked cooling vents, Clogged filters, Overloaded motor due to blockage, Failing motor bearings

Safety first: Remove the battery and allow the vacuum to cool completely before inspection.

Clean vents: Use a soft brush to remove dust from all external vents.
Service filters: Clean or replace pre-motor and HEPA filters as per the manual.
Check for blockages: Ensure there are no obstructions in the suction path.
Monitor temperature: After cleaning, run the vacuum for a short period and check if the temperature remains within normal range. Persistent overheating indicates a failing motor that should be replaced.

Medium 3/5

Motor Assembly

Check Price on Amazon

We may earn a commission from links on this page.