Medion Thermal Overload of Motor

Vacuum suddenly shuts off during use and will not restart until it cools down

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Blocked filters, Prolonged use on turbo mode, Clogged air vents around motor, Failing motor bearings increasing load

How to Fix / Troubleshooting

Safety first: Remove the battery and allow the unit to cool for at least 30 minutes before further inspection.

Clean filters thoroughly: Remove pre-motor and HEPA filters. Clean or wash as specified in the manual and dry completely.
Check for blockages: Inspect the entire airflow path from nozzle to exhaust for obstructions.
Inspect vents: Clean dust from motor cooling vents with a soft brush.
Monitor operation: After cleaning, run the vacuum on normal mode. If it still overheats quickly, the motor may be worn and should be replaced.

Repair Difficulty

Medium 3/5

Required Part

Motor Assembly

Check Price on Amazon

We may earn a commission from links on this page.