Nilfisk Nozzle LED Circuit Failure

LED lights on the floor nozzle do not illuminate, but brushroll and suction work

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Burned-out LED strip, Broken wire in nozzle, Faulty LED driver on nozzle PCB, Loose connector inside nozzle

Safety: Remove the battery and detach the nozzle.

Check external wiring: Inspect the nozzle neck for visible cable damage.
Open nozzle (if user-serviceable): Remove screws and carefully open the nozzle housing to inspect the LED strip connection.
Reseat connectors: Ensure the LED strip plug is firmly connected to the nozzle PCB.
Replace LED strip/nozzle: If the strip is visibly damaged or still does not light, replace the LED strip or entire nozzle assembly.

Medium 3/5

Floor Nozzle LED Strip

Check Price on Amazon

We may earn a commission from links on this page.