Progress
Intermittent Power Loss / Tilt Sensitivity
Vacuum shuts off randomly when moved or tilted, then restarts when upright
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Loose battery connection, Worn trigger switch, Damaged tilt sensor, Broken solder joints on PCB
How to Fix / Troubleshooting
Safety: Remove the battery before opening the housing.
- Check battery fit: Ensure the battery locks securely and does not move when the vacuum is shaken gently.
- Test trigger: Hold the trigger and gently move the vacuum. If power cuts out with slight movement, the trigger switch or internal wiring may be loose.
- Inspect internal connections: Open the housing and reseat connectors. Look for cracked solder joints around the battery terminals and switch.
- Replace faulty parts: Replace the trigger switch, battery connector, or control PCB as needed.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Trigger Switch
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements