E10
Russell Hobbs
Floorhead LED / Accessory Power Fault
E10 error and the LED headlight on the floorhead flickers or does not work
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Shorted LED strip in motorised floorhead, Damaged wiring in wand, Faulty accessory power output on main PCB, Loose connector between wand and floorhead
How to Fix / Troubleshooting
Safety first: Turn off the vacuum and remove the battery.
Check connections:
- Detach the wand and motorised floorhead. Inspect the electrical connectors at both ends of the wand for bent pins or damage.
- Reconnect the wand and floorhead firmly until you hear or feel a click.
- Refit the battery and test. If E10 returns and the LED still flickers, remove the floorhead and test the vacuum with a different powered accessory (if supplied). If the other accessory works, the floorhead LED circuit is likely faulty.
- If no powered accessories work and E10 persists, the wand wiring or main PCB accessory output may be damaged and require replacement.
Warning: Do not attempt to re-solder or modify LED strips unless you are qualified; incorrect repair can cause overheating.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Motorised Floorhead LED Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements