TCL Floor Head LED Failure

LED headlight on the TCL motorized floor head does not turn on, but the brush and suction work.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Burned-out LED strip, Broken wire inside floor head, Failed LED driver on floor head PCB, Loose connector to LED board

How to Fix / Troubleshooting

Safety first: Turn OFF and remove the battery before inspecting the floor head.

  • 1. Check connector: If accessible, inspect the small connector from the floor head PCB to the LED strip for looseness.
  • 2. Inspect for damage: Look for cracks or impact damage on the front of the floor head where the LEDs are located.
  • 3. Function check: Since suction and brush work, the issue is isolated to the LED circuit.

Repair: The LED strip or floor head PCB must be replaced. In most cases, replacing the entire motorized floor head assembly is the practical solution.

Advertisements

Repair Difficulty

Medium 3/5

Required Part

Motorized Floor Head Assembly
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements