Tineco Intermittent Electrical Connection in Wand or Head

Vacuum intermittently cuts out when moving the wand or rotating the floor head.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Broken or frayed wires inside wand, Loose connector between wand and main body, Worn contacts on floor head, Cracked wand tube affecting wiring

Safety first: Remove the battery before inspecting the wand and head.

Re-seat connections: Detach and firmly reattach the wand to the main body and floor head.
Flex test: With the unit off, gently flex the wand and observe for visible cracks or kinks.
Operational test: With the battery installed, run the vacuum and gently move the wand and head. If power cuts out when moved, the wiring is likely damaged.
Replace suspect part: Replace the wand assembly or floor head that causes the interruption.

Medium 3/5

Wand Assembly / Floor Head Connector

Check Price on Amazon

We may earn a commission from links on this page.