F2
AEG
Drain Fault (Alternate Code Set)
Dishwasher shows F2 and water remains in the bottom after the cycle.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blocked filters, Clogged drain hose, Jammed drain pump, Faulty drain pump on AEG dishwasher
How to Fix / Troubleshooting
Safety first: Unplug the dishwasher before clearing blockages.
- Clean filters and sump: Remove and wash all filters. Check the sump for debris.
- Inspect drain hose: Ensure the hose is not kinked and that the sink trap spigot is clear.
- Check pump impeller: Access the drain pump and verify that the impeller spins freely. Remove any obstructions.
- Replace pump if necessary: If the pump is noisy, seized, or electrically open, replace it.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements