AEG Water Inlet Valve / Flow Control Fault (Alternate Code Set)

Dishwasher displays F7 and may overfill or underfill.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Stuck inlet valve, Faulty flow control, Wiring fault to valve on AEG dishwasher

Safety first: Unplug the dishwasher and close the water tap.

Check for continuous filling: With power off and tap open, verify that no water enters. If water flows, the inlet valve is stuck open and must be replaced.
Inspect valve wiring: Ensure the valve connector is secure and not corroded.
Replace valve if faulty: If the valve does not open when commanded or leaks when closed, install a new AEG-compatible inlet valve.

Hard 4/5

Water Inlet Valve

Check Price on Amazon

We may earn a commission from links on this page.