i80
AEG
Configuration / EEPROM Error
Dishwasher displays i80 and may not start or may behave unpredictably.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Corrupted program memory on main PCB, Incorrect configuration data, Faulty main control board on AEG dishwasher
How to Fix / Troubleshooting
Safety first: Switch off and unplug the dishwasher.
- Power reset: Leave the appliance unplugged for at least 15 minutes to allow capacitors to discharge, then reconnect and try again.
- Check for moisture in control panel: If the door control area has been exposed to steam or leaks, dry it thoroughly and allow time before retesting.
- Factory reset (if available): Some AEG models allow a reset via a button combination (consult the user manual). Perform this to reload default settings.
- Board replacement: If i80 persists, the EEPROM or microcontroller on the main PCB is likely faulty. The control board must be replaced by a qualified technician.
Advertisements
Repair Difficulty
Professional Required
5/5
Required Part
Main Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements