Amana
Partial Drain / Slow Drain
Dishwasher does not drain completely; standing water remains in the bottom after cycle ends.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Partially clogged drain hose, debris in drain pump, blocked air gap, kinked hose under sink
How to Fix / Troubleshooting
Safety first: Turn off power. Expect some water spillage.
- Clean filters and sump: Remove and clean the filters. Check the sump area for debris blocking the drain inlet.
- Check air gap: If your sink has an air gap, remove the cap and clean out any debris.
- Inspect drain hose: Look under the sink for kinks or sags in the hose. Disconnect from the sink/disposal and flush with hot water.
- Check pump impeller: Access the drain pump and inspect the impeller for obstructions or damage.
Repair action: Clear all obstructions. If the pump impeller is damaged or the motor is weak, replace the drain pump assembly.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements