Amana
Start Circuit / Control Lock / Door Latch Issue
Dishwasher has power but will not start a cycle; lights may be on but pressing Start does nothing.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Control lock enabled, door not fully latched, failed door switch, faulty Start button on user interface
How to Fix / Troubleshooting
Safety first: Disconnect power before removing panels.
- Check control lock: Look for a lock icon or indicator. Disable by holding the designated button (often "Heated Dry" or "Control Lock") for 3–5 seconds.
- Verify door closure: Close the door firmly until it clicks. If you must push hard or the door springs back, adjust the latch or strike.
- Test door switch: Access the latch assembly and test the switch for continuity when latched. Replace if it does not close properly.
- Check Start button: If other buttons respond but Start does not, the keypad may be faulty and require replacement.
Repair action: Replace the door latch/switch assembly or user interface panel as needed. Ensure the door aligns correctly with the tub frame.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Door Latch Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements