F5E2
Amana
Door Switch Stuck Closed or Open During Operation
Dishwasher displays F5E2 and may stop mid-cycle when the door is opened, then not resume correctly.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Intermittent door switch, loose latch, warped door, wiring harness issue to door switch
How to Fix / Troubleshooting
Safety first: Disconnect power.
- Check for play in door: Wiggle the door when closed. Excessive movement can cause intermittent door switch contact.
- Inspect hinges and latch: Look for bent hinges or a worn latch that may allow the door to move during operation.
- Test door switch repeatedly: With a multimeter, open and close the latch while monitoring continuity. Any flickering or inconsistent readings indicate a failing switch.
- Check harness: Inspect the wiring from the door switch to the control board for pinched or broken wires, especially where the harness passes into the door.
Repair action: Replace the door latch/switch assembly if intermittent. Repair or replace damaged wiring. Ensure the door closes firmly and evenly.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements