Balay
Door Spring / Cable Failure
Dishwasher door drops down quickly or does not stay in intermediate positions.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Broken door spring, Snapped door tension cable, Misadjusted spring tension, Worn hinge components
How to Fix / Troubleshooting
Safety first: Unplug the dishwasher before working on the door. The door is heavy and can cause injury if it falls.
- Support the door: Use a sturdy object or have a helper hold the door while inspecting.
- Remove side panels: Take off the left and right side panels to access the door springs and cables.
- Inspect springs and cables: Look for broken springs or frayed/snapped cables attached to the door hinges.
- Replace in pairs: Replace both springs or both cables to maintain balanced tension.
- Adjust tension: If adjustable, set the spring tension so the door stays open at about 45° without falling or rising.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Door Springs / Tension Cables
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements