Dishwasher shows F6 E8 and may not fill to correct level.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Partial blockage in inlet system, Air lock in water matrix, Faulty level sensor, Low water pressure

Safety first: Unplug the appliance.

Verify water pressure: Ensure household water pressure is adequate and other taps flow normally.
Bleed air: Start a cycle and after initial fill, open and close the door to help release trapped air in the system.
Clean inlet path: Descale the water matrix and inlet channels if limescale is visible.
Check level sensor: Inspect and, if necessary, replace the water level sensor.

Medium 3/5

Water Level Sensor

Check Price on Amazon

We may earn a commission from links on this page.