F8 E1
Bauknecht
Overflow / Leak Detected
Dishwasher displays F8 E1 and the base may contain water.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Leaking sump seal, Loose circulation pump clamp, Cracked internal hose, Overfoaming
How to Fix / Troubleshooting
Safety first: Disconnect power and close water tap.
- Drain and dry base: Tilt the dishwasher to remove water from the base tray and dry thoroughly.
- Run inspection cycle: With side panels removed, run a short cycle and watch for leaks.
- Repair leak: Replace leaking hoses, tighten clamps, or replace the sump seal as needed.
- Avoid over-detergent: Use only dishwasher detergent and correct dosage to prevent overfoaming.
Advertisements
Repair Difficulty
Hard
4/5
Advertisements