E19
Baumatic
Detergent Dispenser / Dosing Fault
Dishwasher shows E19 and may not complete the program.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Faulty detergent dispenser solenoid, Jammed dispenser lid, Broken dispenser spring, Wiring fault to dispenser
How to Fix / Troubleshooting
Safety first: Unplug the dishwasher before removing the inner door panel.
- Check dispenser manually: Open the door and inspect the detergent and rinse aid dispenser. Ensure the lid is not warped or obstructed by dried detergent.
- Clean thoroughly: Remove any caked-on detergent from the dispenser and surrounding area using warm water and a soft brush.
- Test lid movement: The lid should open and close smoothly. If it sticks, the dispenser may need replacement.
- Inspect wiring: Remove the inner door panel to access the detergent dispenser assembly. Check the solenoid connector and wiring for damage.
- Replace dispenser: If the solenoid is open-circuit or the mechanism is broken, replace the entire dispenser unit.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Detergent Dispenser Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements