Baumatic
Standing Water / Incomplete Drain
Water remains in the bottom of the dishwasher after the cycle completes.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blocked filters, Blocked drain hose, Obstructed sink trap, Weak or failed drain pump
How to Fix / Troubleshooting
Safety first: Unplug the dishwasher and be careful of sharp objects in the sump.
- Clean filters: Remove and clean all filters thoroughly.
- Check sump: Remove any visible debris from the sump area.
- Inspect drain hose: Check for kinks or blockages. Disconnect from the sink spigot and flush through with water.
- Check sink trap: Clean the sink trap and spigot where the hose connects.
- Test drain pump: Start a drain program and listen for the pump. If silent or only humming, the drain pump may need replacement.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements