E11
BECKEN
Drying Fan or Ventilation Error
Dishwasher displays E11 and may stop during drying; fan noises may be absent or intermittent.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed drying fan motor, Blocked vent duct, Faulty fan wiring, Defective control board fan output
How to Fix / Troubleshooting
Safety first: Unplug the dishwasher before removing the door or top panel.
- Check drying performance: If dishes remain very wet and E11 appears, suspect the fan or vent system.
- Access the fan: On many Becken models, the drying fan is located in the door or top panel. Remove the inner door panel screws to expose the fan housing.
- Inspect for blockage: Check the vent duct and fan blades for lint, grease, or packaging material. Clean thoroughly.
- Test the fan: Spin the fan by hand to ensure it moves freely. With the appliance unplugged, measure resistance across the fan motor terminals; an open circuit indicates a failed motor.
- Check wiring: Inspect connectors and harness from the fan to the control board for damage or loose connections.
If the fan motor is defective, replace the complete drying fan assembly specified for your Becken dishwasher.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Drying Fan Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements