Beko Door Spring / Hinge Cable Failure

Dishwasher door drops down quickly or will not stay in a partially open position.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Broken door spring, Snapped tension cable, Misadjusted spring tension, Worn hinge mechanism

Safety: Unplug the dishwasher before working on hinges or springs.

Remove side panels: Pull the dishwasher out slightly and remove the side panels to access the door springs and cables.
Inspect springs and cables: Look for broken or disconnected springs or frayed cables. Replace both sides in pairs to maintain balance.
Adjust tension: On adjustable models, set the spring tension so the door stays in any open position without slamming.
Test door movement: Open and close the door several times to ensure smooth, controlled motion.

Medium 3/5

Door Spring & Cable Kit

Check Price on Amazon

We may earn a commission from links on this page.