Beko
Internal Hose / Pump / Tub Leak
Dishwasher leaks water from underneath or from the sides, not from the door.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Loose hose clamp on circulation or drain hose, Cracked sump or tub, Leaking circulation pump seal, Split water matrix
How to Fix / Troubleshooting
Safety: Unplug the dishwasher and close the water tap immediately.
- Pull out and inspect: Slide the dishwasher out of the cabinet and remove side and bottom panels.
- Run a test with panels off: Place towels under the unit and run a short cycle while observing for drips from hoses, pumps, and the water matrix.
- Tighten or replace hoses: Tighten any loose clamps and replace cracked hoses.
- Replace leaking components: If the circulation pump seal or water matrix is leaking, replace the affected part. Do not operate the dishwasher until the leak is fully repaired.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Circulation Pump Seal
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements