Beko Circulation Pump Failure

Dishwasher displays H6, often indicating a circulation pump problem.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Seized circulation pump, Burnt motor windings, Blocked impeller, Wiring fault to pump

Safety: Disconnect power and close the water tap.

Listen for pump operation: During wash, if you hear only humming or nothing at all, the circulation pump may be stuck or failed.
Access pump: Remove the bottom cover and locate the circulation pump.
Inspect impeller: Remove the pump and check for obstructions. Ensure the impeller spins freely.
Electrical test: Measure winding resistance. Replace the pump if open, shorted, or mechanically seized.

Professional Required 5/5

Circulation Pump Assembly

Check Price on Amazon

We may earn a commission from links on this page.