Dishwasher does not drain completely; water remains in the bottom after cycle ends but no error code is shown.

Safety first: Turn off power and be cautious of sharp debris in the sump.

• 1. Clean filters: Remove and clean the filter assembly and check the sump for debris.
• 2. Inspect drain pump: Access the drain pump from the bottom, remove the pump cover if possible, and clear any obstructions from the impeller.
• 3. Check drain hose routing: Ensure the hose has a high loop under the counter to prevent backflow and is not kinked.
• 4. Sink connection: Remove the hose from the sink tailpiece or disposal and check for clogs. Clear as needed.

After clearing, run a rinse cycle to confirm proper drainage.