Bosch Internal Hose / Sump / Pump Leak

Dishwasher leaks from underneath; water appears on the floor under the unit.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Cracked sump assembly, Loose hose clamp, Leaking circulation pump seal, Split drain hose

How to Fix / Troubleshooting

Safety first: Disconnect power and water supply. Use caution when moving the dishwasher to avoid damaging flooring.

  • Pull out the dishwasher: Slide the unit out from the cabinet to inspect the underside.
  • Run a short cycle while observing: With panels removed, run a brief fill and wash to identify the leak source (do this only if you can do so safely and avoid contact with live parts).
  • Tighten clamps: Check all hose clamps at the sump, pump, and heat exchanger. Tighten any loose clamps.
  • Replace damaged parts: If the sump is cracked or the pump seal is leaking, replace the sump assembly or circulation pump with Bosch-approved parts.
  • Dry base pan: After repair, dry the base pan completely to prevent E15 leak errors.
Advertisements

Repair Difficulty

Hard 4/5

Required Part

Sump Assembly or Circulation Pump
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements