Dishwasher displays E17 and may stop with very little water in the tub.

Safety first: Turn off power and close the water tap before disconnecting hoses.

• 1. Check water pressure: Ensure other taps in the house have normal pressure. If pressure is low, contact your water supplier or plumber.
• 2. Fully open tap: Confirm that the dishwasher's supply tap is fully open and not restricted by a self-piercing valve.
• 3. Clean inlet filters: Unscrew the inlet hose from the tap and dishwasher. Remove and rinse the mesh filters to clear sediment.
• 4. Inspect flow meter: Access the water matrix and flow meter. Clean and verify that the turbine spins freely. Replace the flow meter if defective.