Café
No Power / Dead Control
Dishwasher will not power on at all; no lights or display, no response to buttons.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Tripped circuit breaker, Loose power connection at junction box, Faulty power cord, Failed main control board
How to Fix / Troubleshooting
Safety first: Turn off power at the breaker before opening any electrical compartments.
- Check breaker: Verify the dishwasher circuit breaker is ON. Reset if tripped.
- Test outlet/circuit: If the dishwasher is cord-connected, test the outlet with another appliance. For hardwired units, proceed to the junction box.
- Inspect junction box: Remove the lower kick panel and open the junction box cover. Ensure wire nuts are tight and no wires are burned or disconnected.
- Check door latch: Confirm the door is closing and latching properly; some models will not power the control if the latch switch is open.
- If still dead: The main control board or user interface may have failed. Replacement typically requires a technician familiar with Café dishwashers.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Main Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements