Display shows H2O and the dishwasher does not fill properly or stops early.

Safety First: Turn off power and close the water supply valve before disconnecting hoses.

• Open water valve fully: Under the sink, ensure the shutoff valve feeding the dishwasher is fully open.
• Check for kinks: Inspect the inlet hose for sharp bends or crushing behind the dishwasher.
• Clean inlet screen: Disconnect the hose at the dishwasher and rinse the inlet valve screen to remove sediment.
• Run hot water first: Before starting a cycle, run hot water at the sink until it is hot, then start the dishwasher to improve fill performance.
• When to call for service: If H2O persists with good pressure and a clean screen, the inlet valve or flow sensing may need professional replacement.