E10
Danby
Control Board Communication / Internal Fault
Dishwasher displays E10; unit may not start and control panel may be unresponsive or erratic.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Defective main control board, Loose control board connectors, Power surge damage, Faulty user interface board
How to Fix / Troubleshooting
Safety first: Disconnect power at the breaker before opening the control panel.
- Power reset: Turn off the breaker for 5 minutes, then restore power to see if the error clears.
- Inspect control connections: Remove the inner door panel and check all wiring harnesses to the main control board and user interface. Reseat connectors firmly.
- Check for visible damage: Look for burned components, corrosion, or moisture on the control board.
- Dry moisture: If there are signs of condensation, allow the unit to dry completely and improve ventilation around the dishwasher.
- If E10 persists: The main control board or user interface board may need replacement. This is typically a level-4 repair and may be best handled by a qualified technician.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Main Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements