E12
Danby
Fan-Assisted Drying / Ventilation Fault (models with fan dry)
Dishwasher displays E12; drying performance is poor and plastic items remain wet.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed drying fan motor, Blocked vent duct, Faulty vent flap, Defective fan wiring or control
How to Fix / Troubleshooting
Safety first: Disconnect power before accessing the door or side panels.
- Check for obvious vent blockage: Inspect the vent outlet on the door or side of the unit for obstructions or buildup.
- Access fan assembly: Remove the inner door panel to locate the drying fan (if equipped). Check for broken blades or obstructions.
- Test fan operation: During a dry cycle, listen for fan operation. If silent, test the fan motor for continuity with a multimeter.
- Clean vent path: Remove lint, grease, or mineral deposits from the vent duct and flap.
- Replace faulty fan: If the fan motor is open or seized, install a new drying fan assembly.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Drying Fan Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements