E10
Electrolux Professional
Mains Supply / Voltage Error
Dishwasher shows E10 and may not start or may stop unexpectedly.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Incorrect supply voltage, Loose mains terminal block, Faulty mains filter (EMI filter), Power phase loss on three-phase models
How to Fix / Troubleshooting
Safety first: Only qualified personnel should work on mains connections. Disconnect power at the breaker before opening electrical compartments.
- Verify supply: Confirm that the dishwasher is connected to the correct voltage and phase configuration as per the rating plate.
- Inspect mains terminal block: Remove the service cover and check that all supply wires are tight and free of overheating marks.
- Check mains filter: Examine the EMI filter module for signs of burning or swelling. Replace the mains filter if damaged.
- Measure voltage: With power restored (technician only), measure voltage at the terminal block and compare with specifications. Correct any building supply issues.
Advertisements
Repair Difficulty
Professional Required
5/5
Advertisements