E16
Electrolux Professional
User Interface / Keypad Fault
Dishwasher displays E16 and may not accept input from buttons or touch panel.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Defective touch panel or keypad, Moisture ingress in control panel, Damaged ribbon cable, Stuck button
How to Fix / Troubleshooting
Safety first: Disconnect power before removing the door panel.
- Inspect control panel: Remove the inner door panel to access the user interface. Check for signs of moisture, detergent residue, or corrosion.
- Dry and clean: If moisture is present, dry the area thoroughly and clean contacts with isopropyl alcohol.
- Check ribbon cable: Ensure the cable between the user interface and main board is intact and firmly connected.
- Test buttons: Press each button and feel for proper movement. A physically stuck button may require replacement of the user interface panel.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
User Interface Panel
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements