Electrolux Professional
Rinse Aid Dosing Failure
Rinse aid is not being used; level never drops.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blocked rinse aid outlet, Defective rinse aid dispenser, Incorrect settings disabling rinse aid, Faulty control signal
How to Fix / Troubleshooting
Safety first: Disconnect power before servicing the door.
- Verify settings: Check the machine's programming to ensure rinse aid dosing is enabled and set correctly.
- Inspect dispenser: Remove the dispenser and check the outlet for dried product or blockages. Clean thoroughly.
- Functional test: During a cycle, observe whether the dispenser opens. If not, replace the rinse aid dispenser.
- Control check: If a new dispenser does not operate, the control board output may be faulty and require replacement.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Rinse Aid Dispenser
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements