E1
Fagor
No Water Inlet Detected
Dishwasher beeps and shows E1; machine does not fill with water.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Water tap closed, Inlet hose kinked, Inlet valve coil open circuit, Aquastop inlet hose (if fitted) triggered
How to Fix / Troubleshooting
Safety first: Disconnect power and close the water tap before handling hoses.
- Verify tap: Confirm the water tap supplying the Fagor dishwasher is fully open.
- Check hose routing: Ensure the inlet hose is not bent sharply or crushed behind the cabinet.
- Aquastop (if present): If your Fagor model uses an Aquastop hose, inspect the external housing for signs of activation (bulging or water inside). A triggered Aquastop must be replaced.
- Valve test: If you are comfortable with electrical testing, disconnect the inlet valve connector and measure coil resistance. An open reading indicates a failed valve that must be replaced.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Fagor Aquastop inlet hose or water inlet valve
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements