E2
Fagor
Drain Error
Dishwasher shows E2; water remains in the tub at the end of the cycle.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blocked drain filter, Clogged drain hose or sink connection, Jammed drain pump impeller, Faulty drain pump motor
How to Fix / Troubleshooting
Safety first: Unplug the dishwasher before reaching into the sump or removing the lower panel.
- Clean filters: Remove and wash all filters thoroughly.
- Check sink connection: Detach the drain hose from the sink trap or garbage disposal and clear any blockage. Ensure the knockout plug in a new disposal has been removed.
- Inspect pump: Access the drain pump from the bottom. Remove the pump cover and check for glass, bones, or other debris blocking the impeller.
- Replace pump: If the impeller is damaged or the motor does not run when powered, replace the Fagor drain pump assembly.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Fagor drain pump assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements