Finlux
Door Spring / Hinge Cable Failure
Dishwasher door drops down quickly or will not stay in the half-open position.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Broken door spring, Snapped or stretched door tension cable, Worn hinge mechanism, Incorrect installation causing strain
How to Fix / Troubleshooting
Safety first: Disconnect power before removing side panels. Support the door to prevent it from dropping suddenly.
- 1. Inspect door movement: Open and close the door slowly. If it falls freely or feels very heavy, a spring or cable is likely broken.
- 2. Access hinges: Remove the side panels or plinth to view the hinge area. Look for broken springs or frayed tension cables attached to the door hinges.
- 3. Replace in pairs: Replace both door springs or both tension cables to maintain balanced operation.
- 4. Check installation: Ensure any decorative cabinet door panel is not excessively heavy for the hinge rating.
- 5. Test carefully: After replacement, open and close the door several times to confirm smooth, controlled movement.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Door Spring and Cable Kit
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements