Frigidaire Professional Partial Keypad Failure

Dishwasher display works but some buttons do not respond or require very hard presses.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Worn or damaged user interface membrane, Moisture intrusion into control panel, Loose ribbon cable connection, Cracked control panel housing

Safety First: Disconnect power at the breaker before opening the door panel.

Dry the panel: Wipe the control panel dry and avoid spraying cleaners directly on it.
Inspect ribbon cable: Remove the inner door panel and reseat the ribbon cable between the UI and main control.
Test buttons: If specific buttons remain unresponsive, the UI board or membrane is likely failed and should be replaced.
Replace UI assembly: Install a Frigidaire Professional-compatible user interface/control panel assembly if needed.

Medium 3/5

User Interface Control Board

Check Price on Amazon

We may earn a commission from links on this page.