Dishwasher displays CL and will not start a cycle; controls may appear locked.

Safety First: No internal service is required for this condition; do not disassemble while under warranty.

• 1. Disable control lock: Press and hold the designated Control Lock or Heat Dry button (varies by model) for 3–5 seconds until the CL indicator turns off.
• 2. Power reset: If the lock will not clear, turn off the breaker for 2 minutes, restore power, and try the unlock sequence again.
• 3. Check for stuck button: Press each button to ensure none are physically stuck. Clean the panel surface.

If CL remains on and the panel does not respond, the user interface board may be faulty and require replacement.