Dishwasher displays RA; rinse aid indicator may not function correctly.

Safety First: Turn off power at the breaker before working on the door components.

• 1. Refill rinse aid: Open the dispenser and fill with rinse aid to ensure the sensor is submerged and can read correctly.
• 2. Inspect dispenser: Check for cracks or leaks around the rinse aid compartment. Clean any dried detergent or residue from the cap and opening.
• 3. Access wiring: Remove the inner door panel to access the dispenser wiring. Ensure the connector is fully seated and wires are not pinched.
• 4. Replace dispenser assembly: If the RA code persists, replace the complete Frigidaire detergent/rinse aid dispenser assembly, which includes the level sensor.

After replacement, clear the code by cycling power and running a test cycle.