E14
Fulgor Milano
Flow Meter / Water Intake Measurement Error
Dishwasher displays E14 and may not complete the cycle; water usage seems abnormal (too much or too little).
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Defective flow meter, Blocked water matrix channels, Air in inlet system, Loose flow meter connector
How to Fix / Troubleshooting
Safety first: Disconnect power and close the water supply valve.
- Access flow meter: On many Fulgor Milano dishwashers, the flow meter is integrated into a side-mounted water matrix or softener assembly. Remove the side panel to locate it.
- Inspect for blockages: Check the transparent water channels for debris or scale. Flush with warm water if removable, or replace the water matrix if severely blocked.
- Check wiring: Ensure the flow meter connector is secure and free of corrosion. Reseat the connector.
- Replace flow meter: If the control does not register water pulses (verified via service mode or diagnostics) and wiring is intact, replace the flow meter assembly.
After repair, run several cycles and monitor for normal fill times and absence of E14.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements