GE Appliances Water Inlet / Fill Error

Dishwasher displays E1; may not start or may stop shortly after starting.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Closed water valve, Clogged inlet screen, Kinked fill hose, Failed water inlet valve

Safety: Disconnect power and close the water supply valve.

Confirm water supply: Ensure the under-sink valve is open and water pressure is adequate.
Inspect and clean inlet screen: Disconnect the fill hose at the dishwasher and clean the screen in the inlet valve.
Check hose routing: Straighten any kinks or pinched sections of the fill hose.
Replace inlet valve: If the valve coil is open or the valve does not open when energized, replace the water inlet valve.

Medium 3/5

Water Inlet Valve

Check Price on Amazon

We may earn a commission from links on this page.