F7
GE Appliances
Flow Meter / Water Level Fault
Dishwasher displays F7; may indicate a flow meter or water level sensing issue.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Defective flow meter, Blocked fill path, Wiring issue to flow sensor, Control misreading pulses
How to Fix / Troubleshooting
Safety: Disconnect power and water before working on the fill system.
- Check fill performance: Confirm that the dishwasher is actually filling with water to the correct level.
- Inspect flow meter (if equipped): Some GE models have a small flow sensor in the fill assembly. Inspect for debris and ensure the impeller spins freely.
- Test wiring: Check continuity from the flow meter to the control board.
- Replace flow meter or control: If the sensor is defective, replace it. If sensor and wiring are good, the control board may need replacement.
Advertisements
Repair Difficulty
Hard
4/5
Advertisements