GE Café Poor Drainage / Standing Water

Dishwasher does not drain; standing water remains in the bottom after the cycle completes.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Clogged drain hose, Blocked air gap or disposer inlet, Obstructed drain pump, Failed drain pump motor

Safety first: Turn off power and be prepared for water when disconnecting hoses.

Check sink drain: Ensure the sink and garbage disposer drain freely.
Clean air gap: Remove the air gap cap and clear any debris.
Inspect drain hose: Disconnect at the sink/disposer and flush with hot water. Straighten any kinks.
Clean sump and pump: Remove filters and check the sump for obstructions. Access the GE Café drain pump and clear the impeller housing.
Replace pump if needed: If the pump does not run or is weak, replace the drain pump.

Medium 3/5

GE Café Dishwasher Drain Pump

Check Price on Amazon

We may earn a commission from links on this page.